Models Showcase: free 3D-printable organizers

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Others Collections & display

0

Unity sand ceremony set

MAIN PURPOSE: Pour two colours of sand into one heart at a wedding

A unity sand set for weddings and vow renewals. Each partner pours their colour of sand from a round cup into the heart-shaped keepsake vessel, where the layers mix and can never be separated. The heart has a lid so it can be kept on a shelf afterwards.

Printing notes

251.4 cm³

Volume

311.7 g

Est. weight

2,808

Triangles

Print the heart vessel in white; fill the two cups with contrasting sand. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Others Pets & aquarium

0

Cricket dusting shaker

MAIN PURPOSE: Coat feeder insects with calcium for a reptile

A screw-top shaker cup for reptile keepers: drop in feeder crickets or roaches with a pinch of calcium or vitamin powder, cap it, and swirl, and every insect comes out evenly coated. It is tall enough that they can't climb out, and the side scoop holds the powder spoon.

Printing notes

102.0 cm³

Volume

126.5 g

Est. weight

6,504

Triangles

Add a pinch of calcium powder, drop in the crickets, cap it and shake gently. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Desk & office Paper & bookbinding

0

Glue Bridge

MAIN PURPOSE: Keep PVA glue and wipe the brush

A PVA pot for bookbinding and paper crafts: the bar across the top is for wiping excess glue off the brush, so it goes on thin and even, and the snug lid keeps the glue workable between sessions. Fill to just below the bar.

Printing notes

49.1 cm³

Volume

60.9 g

Est. weight

5,688

Triangles

PETG; PVA peels off it when dry. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Kitchen Food preparation

0

Emulsion Line

MAIN PURPOSE: Mix a perfect vinaigrette by the marks

A screw-top dressing shaker with the recipe on the side: pour vinegar or lemon juice up to the lower mark and oil up to the upper one, add salt and a spoon of mustard, screw on the lid and shake. The marks give the classic one-to-three vinaigrette every time, and the leftovers keep in the fridge in the same jar.

Printing notes

30.6 cm³

Volume

38.0 g

Est. weight

8,512

Triangles

Food-safe PETG, 3 walls so it is watertight. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Others Home hardware & architecture

0

Fluted Stop

MAIN PURPOSE: Prop a door with a sand-filled column

A fluted column doorstop: fill the hollow shaft with about a kilo of sand or gravel, close the lid with its round finial and stand it against the door. It holds a door open like a cast-iron stop, and on a shelf it reads as a small classical column.

Printing notes

170.6 cm³

Volume

211.5 g

Est. weight

3,160

Triangles

Print in PLA; fill with dry sand and tape the lid shut. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Others Travel & everyday carry

0

Twin Landing

MAIN PURPOSE: Pack small valuables, then tray them out

Packs as one closed box for watch, rings, earbuds and cables; in the hotel room lift off the lid, set it down beside the base and you have two landing trays on the nightstand, one for what comes out of your pockets and one for what goes back in tomorrow.

Printing notes

91.5 cm³

Volume

113.4 g

Est. weight

8,572

Triangles

PLA or PETG; line the trays with felt. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Workshop Finishing & painting

0

Mini Podium

MAIN PURPOSE: Grip a miniature and store its parts inside

A miniature painting handle with a storage chamber: fix the figure to the screw lid with a dab of putty and hold the 36 mm body like a thick pen, then unscrew it between figures to keep spare bases, magnets and a brush tip inside. It stands upright on its own while the paint dries.

Printing notes

23.5 cm³

Volume

29.2 g

Est. weight

2,324

Triangles

PLA or PETG; print the lid face down for a flat top. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Workshop Maker & 3D printing

0

Flatspin

MAIN PURPOSE: Unwind filament from a spool lying flat

A low turntable for filament spools: lay the spool flat on the plate, feed the filament up through a guide above the printer, and the ball-bearing base turns as the printer pulls while the rim keeps 200 mm spools centred. Cardboard spools that squeal on rollers unwind smoothly lying down.

Printing notes

349.2 cm³

Volume

433.0 g

Est. weight

6,072

Triangles

Fill the race with 6 mm airsoft BBs. Prints as shown on its floor, no supports. The turntable ring prints separately and runs on 6 mm BBs.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Others Geometric & decorative

0

Aroma Stele

MAIN PURPOSE: Diffuse essential oil from a hidden felt strip

A slim standing stone for scent without flame or power. Drip essential oil onto a strip of wool felt, drop it inside and close the cap: air drifts through the carved vertical slots on both faces and carries the scent, while the felt stays hidden and the oil never touches the furniture.

Printing notes

22.4 cm³

Volume

27.8 g

Est. weight

12,636

Triangles

PETG resists oils better than PLA. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

By Krypto, the SO3D robot

Complexity

Multi-part assembly

Others Music & audio

0

Shoreline Disc

MAIN PURPOSE: Make a soft surf and rain sound by tilting

A tabletop ocean drum. Pour a few spoonfuls of steel BBs or dry rice into the wide shallow drum and close the screw lid: tilt it slowly and the beads roll round the rim like surf on shingle, quicken it for rain. A calming object for the coffee table that is also a real percussion instrument.

Printing notes

353.6 cm³

Volume

438.4 g

Est. weight

6,672

Triangles

Print lid and drum flat; a drop of glue on the thread once filled. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app