Showcase
Models Showcase
Models designed by Krypto, the SO3D robot, and by our members. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category
Lochling
MAIN PURPOSE: Guide desk cables through a lake monster's humps
A loch monster that keeps your cables in line. Its head and neck rise from a 9 mm waterline at one end, three humps arch along the desk and a tail flicks up at the other; thread charging cables through the humps and they stay put. Folklore, cable management and a smile in one 222 mm piece.
Printing notes
69.0 cm³
Volume
85.6 g
Est. weight
1,884
Triangles
Print lying flat in dark green; all strokes come out solid.
Wishlamp
MAIN PURPOSE: Rest rings and a pendant in a lamp-shaped dish
A ring dish in the plan of a storyteller's oil lamp. Rings, studs and a watch rest in the oval body, a necklace pendant lies along the tapering spout and the curled handle sticks out at the back like the real thing. Engraved underneath: rub gently.
Printing notes
24.5 cm³
Volume
30.4 g
Est. weight
5,608
Triangles
Print in gold, bronze or silk PLA. Prints as shown on its outline, no supports.
Siren Fin
MAIN PURPOSE: Detangle hair with a fin-handled comb
A wide-tooth comb crowned with a sea siren's tail. The twin-lobed fin is the grip, the 100 mm spine carries 20 round-tipped teeth with generous gaps for detangling, and the whole comb is one 4 mm print. Beautiful enough to leave out by the mirror.
Printing notes
18.2 cm³
Volume
22.6 g
Est. weight
812
Triangles
Print flat in PETG; teeth along the bed lines.
Tidehalf
MAIN PURPOSE: Share a split keyring that locks into a disc
Two halves of one tide. A 46 mm disc is split by a wave, and both halves are the same shape turned round, so you print two, engrave a name on each and give one away. Clip them to two keyrings; when you meet, the waves lock back into a full circle.
Printing notes
3.3 cm³
Volume
4.0 g
Est. weight
1,576
Triangles
Print two in contrasting colours with different names. Prints flat as a plate, no supports.
Soundmark
MAIN PURPOSE: Display a spoken phrase as a waveform sculpture
The shape of a spoken phrase, made solid. Twenty-five rounded bars rise and fall like a voice saying I love you on a 186 mm baseline, and the baseline face is engraved with the words and the occasion. Stand it on a shelf as a quiet sculpture with a meaning only you know.
Printing notes
78.9 cm³
Volume
97.8 g
Est. weight
9,460
Triangles
Print lying flat; stand it on the baseline.
Thumbstone
MAIN PURPOSE: Calm a restless thumb with a pocket stone
A pocket worry stone with a thumb-shaped hollow. The 46 mm egg outline sits in the palm, its soft 5 mm rim frames a shallow dish exactly where the thumb falls, and the underside carries one engraved word. Rub it on the train, in a meeting or before a hard call.
Printing notes
9.3 cm³
Volume
11.6 g
Est. weight
2,596
Triangles
Print in silk or marble PLA at 100 % infill so it has weight. Prints as shown on its floor, no supports.
MAIN PURPOSE: Hold a bun with a crescent-headed hair fork
A two-prong hair fork with a crescent moon for a head. Twist up a bun, push the 112 mm tapered prongs through and the moon sits on top like a hair ornament; it holds better than a single stick and needs no elastic.
Printing notes
9.7 cm³
Volume
12.0 g
Est. weight
380
Triangles
Print flat in PETG or silk PLA; sand the tips smooth.
Groundbreak
MAIN PURPOSE: Display a painted miniature on a broken-ground base
A display base for a painted miniature, shaped like a slab of ground broken off a battlefield. Fill the 58 mm faceted shell with cork, sand and tufts, set the figure on top, and the front facet carries its name. A magnet in the floor holds it on a steel shelf.
Printing notes
7.5 cm³
Volume
9.3 g
Est. weight
6,476
Triangles
Print in black; fill with cork or putty. 6 x 2 mm magnet. Prints as shown on its outline, no supports.
Hoop Cradle
MAIN PURPOSE: Stand a finished embroidery hoop on a shelf
A stand that shows off finished embroidery in its hoop. The 80 mm foot stays flat on a shelf while two jaws grip the bottom of the hoop rim in a 12 mm slot, so a 10 to 25 cm hoop stands upright like a framed picture. Print one per hoop and change the display with the seasons.
Printing notes
48.2 cm³
Volume
59.7 g
Est. weight
984
Triangles
Print lying on its profile; all parts come out solid. Prints as shown on its outline, no supports.
Ante Guard
MAIN PURPOSE: Protect poker hole cards with a personal guard
A card guard for poker night: the weighted token you set on your hole cards so the dealer never mucks them. The 40 mm guard has a hollow underside for a 2p coin or a washer and your initials engraved in the face. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
3.9 cm³
Volume
4.8 g
Est. weight
1,872
Triangles
Print open side up, glue in a coin, then flip. Print floor-down as shown, then turn it over to use it.